Lockheed L-1011 (L1011) Novair 1/250 Scale Plastic Model by Flight Miniatures
Lockheed L-1011 (L1011) Novair 1/250 Scale Plastic Model by Flight Miniatures
Lockheed L-1011 (L1011) Novair 1/250 Scale Plastic Model by Flight Miniatures
Lockheed L-1011 (L1011) Novair 1/250 Scale Plastic Model by Flight Miniatures
Lockheed L-1011 (L1011) Novair 1/250 Scale Plastic Model by Flight Miniatures
Lockheed L-1011 (L1011) Novair 1/250 Scale Plastic Model by Flight Miniatures
Lockheed L-1011 (L1011) Novair 1/250 Scale Plastic Model by Flight Miniatures
Lockheed L-1011 (L1011) Novair 1/250 Scale Plastic Model by Flight Miniatures
Lockheed L-1011 (L1011) Novair 1/250 Scale Plastic Model by Flight Miniatures
Lockheed L-1011 (L1011) Novair 1/250 Scale Plastic Model by Flight Miniatures
Lockheed L-1011 (L1011) Novair 1/250 Scale Plastic Model by Flight Miniatures
Lockheed L-1011 (L1011) Novair 1/250 Scale Plastic Model by Flight Miniatures
Lockheed L-1011 (L1011) Novair 1/250 Scale Plastic Model by Flight Miniatures
Lockheed L-1011 (L1011) Novair 1/250 Scale Plastic Model by Flight Miniatures

Lockheed L-1011 (L1011) Novair 1/250 Scale Plastic Model by Flight Miniatures

$ 29.99

FREE SHIPPING IN THE US AND US TERRITORIES

1:250 Scale  Plastic Snap-Fit – Lockheed L-1011 TriStar – Length:8.75"  Wingspan: 7.75"

These models from Flight Miniatures are made of plastic and don't need any glue or paints. The assembly is very basic and takes only a few minutes. Assembly consists of nothing more than attaching the wings to the fuselage and then attaching the tail and elevators. Special care has to be taken while attaching the wings since the fitting in these models is quite tight and some pressure needs to be applied. The pressure needs to be applied on the wings and onto the fuselage. Do not, for example, hold the wings from the engines and apply force like that since this will damage and/or break the engine.

The level of detail is very nice and accurate. Wings will show the different panels and sections just as the real thing. The coloring and markings are not decals, so they won't peel off. For the people who are really observant, engines are accurately proportioned and the type of engine is also accurately represented. These type of models are the type which one can see in airline offices and/or at travel agents.

These are not toys, they are not intended to be played with since they are very fragile. However, the constructions is so simple and because they have no moving parts, that casual "flying" (and making noises) will be fine, even if done by a child.

The box measures 8.75 inches long by 2.25 inches high by 1 inch deep

Please note that this is a collector model and is not recommended for children under 8.

The Lockheed L-1011 TriStar, commonly referred to as the L-1011 (pronounced "L-ten-eleven") or TriStar, is an American medium-to-long-range, wide-body trijet airliner by Lockheed Corporation. It was the third wide-body airliner to enter commercial operations, after the Boeing 747 and the McDonnell Douglas DC-10. The airliner has a seating capacity of up to 400 passengers and a range of over 4,000 nautical miles (7,410 km). Its trijet configuration has three Rolls-Royce RB211 engines with one engine under each wing, along with a third engine center-mounted with an S-duct air inlet embedded in the tail and the upper fuselage. The aircraft has an autoland capability, an automated descent control system, and available lower deck galley and lounge facilities.